Providing Value with Hands-On Training

Our SITECH Louisiana Team is dedicated to providing value to those in the construction industry. As an authorized representative of Trimble technology, we are ready and able to help our clients achieve whatever goals they may have. This starts with training. From essential training courses to advanced technology trainings, our Trimble certified trainers can help make the implementation of our technology smooth from the start.

Our Courses

Explore our training courses below, fill out an inquiry form and our team will get back to you shortly to set up a time to discuss your training needs and give you a customized quote.
Business Center
Length: 8 hours (1 day) - 24 hours (3 days)

Prerequisite(s): None - Basic Business Center Training

Student Maximum: 10

Course Description: Whether you need a basic introduction to the Trimble Business Center or need extensive, advanced training, we can guide your team through understanding this interface for modeling and data management.

Course Objectives:
• Calculate earthwork volumes
• Site takeoff & prep with advanced commands
• Intersection & Corridor creation
• Site Calibration
• Much more...

Schedule Now
Basic Construction Surveying
Length: 16 hours (2 days)

Prerequisite(s): None

Student Maximum: 10

Course Description: Do you have little or no knowledge of the technology used in modern site and highway construction, but want to become a construction technology professional? This class is perfect for you! Our Trimble-certified trainers will teach you how to use a variety of construction equipment along with the correct techniques and procedures to ensure proper usage. Additionally, we will teach industry terminology and care instructions for automatic levels, grade lasers and layout gear.

Course Objectives:
• Perform elevation level loop
• Set up and use of survey-grade rods
• Set up and use of Total Station
•Introduction to Data Collector Software
• Much more...

Schedule Now
SCS900 Training
Length: 8 hours (1 day) - 16 hours (2 days)

Prerequisite(s): Experience with general site construction and grade checking is recommended.

Student Maximum: 10

Target Audience: The target audience for this program are site supervisors responsible for managing onsite data to and from the machines, and field crews that are new to the SCS900 Software and Business Center.

Course Description: Whether you need basic training to get up and running or a more in-depth training program, SCS900 training courses provide instruction on the operation of SCS900 software using GPS and Total Stations with a Windows-based mobile computer such as a Trimble TSC3. These trainings are intended for construction contractor field employees involved in grading, stakeout, topographic and volume surveys and include instruction on transferring and creating machine and data collector files. If needed, we can also provide training on the introduction to the Business Center.

Course Objectives:
• Measure site features and surfaces
• Stake our points, lines, roads and surfaces
• Set up Base, Rover and Total Station
• Site calibration
• Much more...

Schedule Now
Siteworks Training
Length: 16 hours (2 days)

Prerequisite(s): Experience with general site construction and grade checking is recommended.

Student Maximum: 10

Target Audience: The target audience for this program are site supervisors responsible for managing onsite data to and from the machines, and field crews that are new to the SCS900 Software and Business Center.

Course Description: If you are a contractor field employee involved in grading, stakeout, topographic and volume surveys, this course is for you! This training program provides more advanced instruction in the operation of Siteworks Software using GPS and Total Stations with Windows 10 OS controller, such as a Trimble TSC7, Kenai tablet or T-10 Tablet. If needed, we can also provide training on the introduction to the Business Center.

Course Objectives:
• Measure site features and surfaces
• Stake out points, lines, roads and surfaces
• Set up Base, Rover and Total Station
• Site calibration
• Much more...

Schedule Now
GCS900 Training
Length: 16 hours (2 days)

Prerequisite(s): Experience with Grading Equipment Operation

Student Maximum: 10

Target Audience: The target audience for this program are site supervisors and operators responsible for managing and operating onsite data to and from the machines.

Course Description: Are you looking to increase your knowledge of the GCS900 Machine Control Systems? This course can provide you with instructions on how to transfer and create machine files as well as how to operate GCS900 software using GPS.

Course Objectives:
• Perform pre-work operations
• Operation and function of the system
• Troubleshooting
• Earthmoving best practices that the technology enables
• Much more...

Schedule Now
Trimble Earthworks Training
Length: 16 hours (2 days)

Prerequisite(s): Experience with Grading Equipment Operation

Student Maximum: 10

Target Audience: The target audience for this program are site supervisors and operators responsible for managing and operating onsite data to and from the machines.

Course Description: If you're looking to increase your knowledge of the Earthworks Machine Control Systems, this course will provide you with instructions on the operation of Earthworks software using GNSS as well as how to transfer and create machine files.

Course Objectives:
• Perform pre-work operations
• Operation and function of the system
• Troubleshooting
• Earthmoving best practices that the technology enables
• Much more...

Schedule Now

Our Courses

Explore our training courses below, fill out an inquiry form and our team will get back to you shortly to set up a time to discuss your training needs and give you a customized quote.
Business Center
Length: 8 hours (1 day) - 24 hours (3 days)

Prerequisite(s): None - Basic Business Center Training

Student Maximum: 10

Course Description: Whether you need a basic introduction to the Trimble Business Center or need extensive, advanced training, we can guide your team through understanding this interface for modeling and data management.

Course Objectives:
• Calculate earthwork volumes
• Site takeoff & prep with advanced commands
• Intersection & Corridor creation
• Site Calibration
• Much more...

Schedule Now
Basic Construction Surveying
Length: 16 hours (2 days)

Prerequisite(s): None

Student Maximum: 10

Course Description: Do you have little or no knowledge of the technology used in modern site and highway construction, but want to become a construction technology professional? This class is perfect for you! Our Trimble-certified trainers will teach you how to use a variety of construction equipment along with the correct techniques and procedures to ensure proper usage. Additionally, we will teach industry terminology and care instructions for automatic levels, grade lasers and layout gear.

Course Objectives:
• Perform elevation level loop
• Set up and use of survey-grade rods
• Set up and use of Total Station
•Introduction to Data Collector Software
• Much more...

Schedule Now
SCS900 Training
Length: 8 hours (1 day) - 16 hours (2 days)

Prerequisite(s): Experience with general site construction and grade checking is recommended.

Student Maximum: 10

Target Audience: The target audience for this program are site supervisors responsible for managing onsite data to and from the machines, and field crews that are new to the SCS900 Software and Business Center.

Course Description: Whether you need basic training to get up and running or a more in-depth training program, SCS900 training courses provide instruction on the operation of SCS900 software using GPS and Total Stations with a Windows-based mobile computer such as a Trimble TSC3. These trainings are intended for construction contractor field employees involved in grading, stakeout, topographic and volume surveys and include instruction on transferring and creating machine and data collector files. If needed, we can also provide training on the introduction to the Business Center.

Course Objectives:
• Measure site features and surfaces
• Stake our points, lines, roads and surfaces
• Set up Base, Rover and Total Station
• Site calibration
• Much more...

Schedule Now
Siteworks Training
Length: 16 hours (2 days)

Prerequisite(s): Experience with general site construction and grade checking is recommended.

Student Maximum: 10

Target Audience: The target audience for this program are site supervisors responsible for managing onsite data to and from the machines, and field crews that are new to the SCS900 Software and Business Center.

Course Description: If you are a contractor field employee involved in grading, stakeout, topographic and volume surveys, this course is for you! This training program provides more advanced instruction in the operation of Siteworks Software using GPS and Total Stations with Windows 10 OS controller, such as a Trimble TSC7, Kenai tablet or T-10 Tablet. If needed, we can also provide training on the introduction to the Business Center.

Course Objectives:
• Measure site features and surfaces
• Stake out points, lines, roads and surfaces
• Set up Base, Rover and Total Station
• Site calibration
• Much more...

Schedule Now
GCS900 Training
Length: 16 hours (2 days)

Prerequisite(s): Experience with Grading Equipment Operation

Student Maximum: 10

Target Audience: The target audience for this program are site supervisors and operators responsible for managing and operating onsite data to and from the machines.

Course Description: Are you looking to increase your knowledge of the GCS900 Machine Control Systems? This course can provide you with instructions on how to transfer and create machine files as well as how to operate GCS900 software using GPS.

Course Objectives:
• Perform pre-work operations
• Operation and function of the system
• Troubleshooting
• Earthmoving best practices that the technology enables
• Much more...

Schedule Now
Trimble Earthworks Training
Length: 16 hours (2 days)

Prerequisite(s): Experience with Grading Equipment Operation

Student Maximum: 10

Target Audience: The target audience for this program are site supervisors and operators responsible for managing and operating onsite data to and from the machines.

Course Description: If you're looking to increase your knowledge of the Earthworks Machine Control Systems, this course will provide you with instructions on the operation of Earthworks software using GNSS as well as how to transfer and create machine files.

Course Objectives:
• Perform pre-work operations
• Operation and function of the system
• Troubleshooting
• Earthmoving best practices that the technology enables
• Much more...

Schedule Now

For Training Videos,
Visit Our YouTube Channel!

Let's Start Training

Name(Required)
Location(Required)

Customer Cancellation Policy: In the event a student or company must cancel their class reservation, we kindly request a week's notice. If proper notice is not given within one week, the company will be assessed a no-show fee of $500 (a one-time charge, not per day). If the class is canceled due to weather implications or instructor illness, no fees are assessed.